The pet water dispenser has a soft breathable light and has 4 different modes:
1. Default mode
3 lighting effects of different colors, forming a cyclic gradient (red, blue, green). The color will change every 7 seconds.
2. Monochrome mode
Press the switch to enter constant light monochrome mode according to your favorite color (red / blue / green).
3. Disable mode
If you don’t need it, please turn off the light.
4. Water shortage reminder
The low water indicator will flash red and the pump will restart automatically after adding water.
1. For indoor use only
2. For the health of your pet, it is recommended to change the water and clean the fountain every week.
3. Sometimes the noisy fountain is the result of low water level or a dirty wheel. Clean the fountain impeller to make sure the water is at least the minimum level.
4. To prevent the activated carbon dust (which will not harm your pet) from falling, soak the filter in water for 2 minutes and rinse it thoroughly under running water before use. It is recommended to rinse thewater filter and sponge at each water change.
5. Depending on your pet’s watering frequency and the number of animals using the water dispenser, replace the filter and sponge every 2 to 3 weeks.
6. Please place the pump in the square notch and make sure the dual probe is facing the transparent window.
7. Please keep the cable away from pets to chew on it.